angle drive

英 [ˈæŋɡl draɪv] 美 [ˈæŋɡl draɪv]

网络  转角传动转角传动装置; 角度传动; 角驱动; 转角传动; 角传动

机械



双语例句

  1. There must be one or more universal joints to permit variations in the angle of drive. There must also be a slip joint that permits the effective length of the propeller shaft to change.
    可轴向移动的球笼式万向节一个或几个万向节来适应传动角度的变化;一套伸缩花键,能够改变传动轴的现有长度。
  2. Application of Anchor Cable Supporting in Irregular Wide Elevation Angle Belt Conveyor Drive Unit Chamber
    锚网索支护在不规则大倾角胶带机头硐室中的应用
  3. Precise Joint Angle Measurement System for Direct Drive Robot
    直接驱动机器人轴角的精密测量系统
  4. Compared with the reciprocating compressors with the structure of traditional crankshaft, it adopts a cam with two repose angle segment to drive the piston.
    与传统曲轴连杆结构压缩机不同的是,它采用带两个休止角段的凸轮驱动活塞,活塞的加速度选择为正弦加速度。
  5. This paper focuses on the optimization design of curved stem cranking bar mechanism used single variation parameter ( auxiliary angle) based on the optimum drive angle and maximum itinerary velocity variation coefficient. The method is practical, feasible and can help improve the quality of mechanism design.
    利用单变参数(辅助角)按最佳传动角及最大行程速度变化系数对曲柄摇杆机构进行优化设计,提高了机构设计质量,方法实用可行。
  6. By use of mathematical analytic method, it is proved in the angle correcting gear drive design that the addendum of both mating gears must be shortened for the realization of drive with radial gap unchanged but without backlash.
    用数学解析法系统地论证了在角度变位齿轮传动设计中,在保证径向间隙不改变和实现无侧隙传动的条件下,齿项必需缩短的问题。
  7. This article discusses the new technology of optimal pressure angle of gear drive design based on subjected optimal theory and Matlab platform.
    以约束优化理论为基础,探究了基于Matlab平台的齿轮传动的压力角优化设计的新思路。
  8. Optimization of Non right Angle Bevel Gear Drive
    轴线非垂直环境下的直齿锥齿轮传动参数优化
  9. Study about Gas Discharge at Solid Angle and Emulsion Drive Fan Equipment
    上隅角瓦斯排放乳化液驱动风扇装置试验研究
  10. The skew angle will infect the drive precision.
    夹角的存在影响传动精度。
  11. The optimizing design of the planet gear wheel system of positive angle change position drive
    正角度变位传动行星轮系的优化设计
  12. Characters of Angle Correcting Gear Drive of External Engagement and Analysis of Results
    外啮合角度变位齿轮传动的特性及其结论分析
  13. On-line Monitoring Method of the Rotating Angle of Drive Motor for On-load Tap Changers
    有载调压分接开关驱动电机旋转角度的在线监测方法
  14. Study of the Design of Tooth Width of Right Shaft angle Face Gear Drive
    正交面齿轮传动中齿宽设计的研究
  15. A Researching for the Method to Get Even Step Angle Drive Current of Stepping Motor
    步进电机细分驱动获得均匀步距的方法研究
  16. Correct Solution of Relative Rotation Angle of Gears in Harmonic Drive
    谐波传动中齿轮相对转角的正确解
  17. The application indicates that the fuzzy controller realizes the automatic control of the angle displacement motor drive system of certain type artillery successfully.
    实际应用表明,该模糊控制器成功地实现了某型号火箭炮内部角位移电机传动系统的自动控制。
  18. A controller of angle displacement motor drive system based on Subsection Analysis. Fuzzy Algorithm is proposed in this paper.
    提出一种基于分段解析模糊算法的角位移电机传动系统控制器。
  19. Design of Shaft Angle Synchro Converter Drive Software Based on VXI Bus
    基于VXI总线的轴角同步器驱动软件设计
  20. The author discusses the oil drilling rigs from the angle of drive types: mechanical-, electric-and hybrid-drive.
    论述了机械驱动、电驱动及混合驱动石油钻机的应用范围、适应性、经济性、可靠性及其技术发展动向。
  21. The Rolling Mill Herringbone Gear Stand Designed with Angle Position Change-the Positive Drive Profile Shifted Gear
    采用角度变位&正传动变位齿轮设计的轧机人字齿轮座
  22. High resolving power rotor position estimated method based on "Hall" signal and torque compensation methods based on advanced angle control sine wave current drive techniques could reduce noise clearly.
    利用基于霍尔信号的高分辨率转子位置推测法及基于超前角控制的转矩补偿法正弦波低噪音驱动新技术,可明显降低噪音。
  23. A Real-time Correction of the Angle Position for the Harmonic Drive Devices
    电磁端面谐波齿轮传动装置转角位置的实时校正
  24. Tracking the solar elevation angle and azimuth angle, drive actuators rotate.
    驱动执行机构对太阳高度角和方位角进行跟踪转动,最后总结了跟踪系统误差产生的主要原因,并提出了系统改进方案。
  25. In our integral experiment, we use basic navigation to get angle and speed, then drive robot moving by PID control.
    在整体实验中,先用基本导航算法获得角度和速度,然后通过PID控制驱动移动机器人行走。
  26. The turret system design project is the background of the thesis, a double-channel angle measuring system and a drive& control system have been constructed.
    本课题以转塔设计项目为背景,构建了转塔的测角系统及驱动控制系统,对二者,重点是双通道测角系统进行了相关的研究、分析工作。
  27. The article carries on a research in method of efficiency auditing from quantitative angle, looking forward to drive the research of theory and practice of performance auditing further.
    本文从定量的角度切入,对绩效审计中效率性审计方法进行探讨,以期进一步推动绩效审计理论研究和实践工作的开展。